What is a microfocus X-ray source?
A microfocus X-ray source produces X-rays from a focal spot measured in microns rather than millimetres, which is what makes high geometric magnification possible without the image going soft. Curpow’s sources run from 4.5 µm to 60 µm depending on model and operating power.
Which Curpow X-ray source do I need?
Pick on voltage first. The CX40 covers 90 kV and gives you the smallest spot, for small features in thin or low-density parts. The CX20 covers 110 kV for battery and general component inspection. The CX30 reaches 130 kV, for denser or thicker parts. The comparison table above puts all three side by side.
What focal spot sizes does Curpow offer?
From 4.5 µm on the CX40WB up to 60 µm on the CX30 at full 40 W power. Spot size grows with power on any microfocus source, so the figure you should specify against is the one at the power you will actually run.
What voltage range do Curpow X-ray sources cover?
20 to 150 kV across the three series: 20 to 90 kV on the CX40, 40 to 110 kV on the CX20, and 50 to 130 kV on the CX30.
Do Curpow X-ray sources include the power supply and controller?
Yes. Each source integrates the X-ray tube, the high voltage power supply and the controller in one package, so integration is a mounting, power and comms job rather than a high voltage cabling job.
What target and window materials does Curpow use?
A tungsten target and a beryllium output window across all three series.
Are Curpow X-ray sources made in the USA?
Yes. Curpow designs and manufactures its sources in Santa Cruz, California.
What is the lead time on a Curpow X-ray source?
Six weeks from order.